- A vertical milling machine has a spindle axis of rotation:
Your answer:
Vertical with the table
Perpendicular to the table
Horizontal
None of the above
- The most common type of milling machine found in modern machine shops is:
Your answer:
Universal
Vertical
Horizontal
Combination
- The Bridgeport milling machine introduced in 1936 is:
Your answer:
Universal
Combination
Vertical
Horizontal
- There are two basic construction types of Milling machines. They are:
Your answer:
Column and knee, and vertical
Column and knee, and fixed bed
CNC and fixed bed
Horizontal and Vertical
- The head on a vertical milling machine:
Your answer:
has the motor attached
transmits power to the spindle
contains the quill
all of the above
- The quill on a vertical milling machine:
Your answer:
contains the gib
has only a horizontal movement
contains the spindle
has only backward movement
- The knee on a vertical milling machine:
Your answer:
Moves along the table ways
Moves along the column
Moves horizontal
None of the above
- The saddle on a vertical milling machine:
Your answer:
Is for sitting on like a stool
Contains the apron
Has no function
None of the above
- Danger field!
Your answer:
When I was born
I was so ugly
the doctor slapped my mother
None of the above
- The turret on a vertical milling machine:
Your answer:
allows the head to be tilted
allows the head to be rotated about the column
is an integral part of the horizontal milling machine
serves no fucntion unless attached to the base
- The ram (overarm) on a vertical milling machine:
Your answer:
Allows the head to be moved over the table
Has the quill-retract arm
Facilitates knee movemt
Contains the tool holder
- To change speed on a step pulley system you must:
Your answer:
Remove the quill
Change belt positions
Adjust the speed while running
None of the above
- To change speed on a variable system you must:
Your answer:
Remove the quill
Adjust the speed while running
Change belt positions
None of the above
- The quill can be moved horizontally within the head by:
Your answer:
Osmosis
Magic
the quill jack
None of the above
- The micrometer collars are used for:
Your answer:
Measuring small parts
Controlling movements of the milling table.
Locking the table to prevent vibrations
All of the above
- The automatic quill feed on a vertical milling machine:
Your answer:
Moves at a fixed rate relative to the spindle rotation
Moves faster than the spindle
Has ten speeds
Moves at a variable rate
- Backlash:
Your answer:
Is used to make a machine more rigid
Performs an important function for the quill feed
Must be taken into account when milling
Prevents fast milling
- Vibrations from backlash can be reduced by:
Your answer:
Slowing down the spindle
Slowing down the feed
Clamping the knee, saddle, and table
None of the above
- To keep your machine maintained you must:
Your answer:
Oil it daily
Keep it clean
Grease it daily
All of the above
- A one-shot pump:
Your answer:
Removes rust
Lubricates the spindle
Lubricates the knee, saddle, and table
All of the above